Rymar Xtreme Weather Wood Sealer | Rymar Stain
Available Colors in Rymar Xtreme Weather Wood Sealer:
**Rymar Premium is still be available in 85085 Cedartone. Please call for pricing.
Rymar Premium is only shipped to non v.o.c states
Clear | Honey Brown | Natural Cedar Honey | Natural Cedartone |
Translucent Ember | Translucent Sienna |
RYMAR WOOD STAIN contains SUNSEAL SUNSCREEN We incorporate special ultra violet absorbers to help retard premature graying of wood along with ultra violet stabilizers, we use special pigments and other proprietary additives to help block out any other ultra violet light thay may penetrate through to the surface. | |
RYMAR WOOD STAIN has Nanofine Oxide Sun Seal, an advanced form of sunscreen which gives unsurpassed UV protection. RYMAR WOOD deck STAIN and grouped Nano Technology, form a protective shield unachievable prior to this technology. | |
RYMAR WOOD SEALER contains CITRONELLA OIL Citronella oil is a naturally occurring organic substance obtained from leaves of Asiatic lemon oil grass. Commonly used as a natural mosquito repellent, Rymar Wood SEALER with citronella oil may help keep those pesky insects away when properly applied to your project. | |
RYMAR CHEW STOP is a natural pepper additive, that may help prevent animals from chewing on wood. Helps discourage bothersome bees, bugs, spiders and birds which might otherwise cause damage to your exterior wood. | |
RYMAR WOOD SEALER contains NATURAL & SYNTHETIC OILS A blend of Supreme linseed oil and synthetic oils allows for good penetration of the wood and still gives a surface build for greater protection of the substrate. PTFE is used to both repel water and help protect against weather erosion. |
ADVANTAGES of Rymar Sealer
Rymar Xtreme Weather Wood SEALER is a high-solids oil base coating that gives wood a rich, beautiful semi-transparent look. It is a wet on wet coating that will last for years. RYMAR WOOD STAIN has up to 55% solids, 25% more solids than our Premium Coating.
WATER REPELLENT Other so-called water repellent wood coatings can’t match the water beading qualities of our coating. Along with the oils and PTFE, you get superior water protection. While most others last for a very short time, ours beads like nothing you’ve seen before. In order to help stabilize wood, you must keep out moisture. RYMAR WOOD SEALER has special waterproofing agents to prevent moisture penetration which helps stop checking, cracking and warping.
RYMAR WOOD SEALER is not a preservative, therefore when properly applied it is a safer alternative.
RYMAR WOOD COATING is Nationally AIM compliant less than 350 G/L.
RYMAR WOOD SEALER is formulated to be grease resistant, a must where food and beverages are prepared and served.
RYMAR WOOD deck STAIN naturals have special pigments that remain virtually invisible when applied, for a clean natural look.
RYMAR WOOD deck STAIN is available in clear, semi-transparent and transparent stain colors.
DIRECTIONS:
Wood should be clean and dry. It is recommended that Rymar Rinseable Soap be used to clean the wood before sealing. If using bleach do not allow it to remain on the wood longer than five minutes. Between coats clean with Rymar Rinseable Soap and water, no bleach. Do Not Use Metal Pails. Do Not Use Hard Water. Ask your Rymar dealer about preparing surfaces for coatings; they may be able to advise you otherwise depending on your situation. A coat should be applied about 30 days after completion of project, provided wood is clean and dry. Do a wet on wet or wet on tack coat: seal two or three boards from one end to the other or up to a natural break, go back and do them again. Do Not Allow Rymar Coating To Puddle. On very dry wood you may need to repeat the procedure in six months to a year. In some cases you may need to reseal or maintain your project more often. Clear will not prevent graying as well as the pigmented colors. When doing wood siding, dipping is best to get all sides. When installing wood siding, saw cuts must also be sealed. End grain on all wood should always be sealed. Coating may be applied with a bristle brush, spray gun, or by dipping. Be sure to shake well before using and stir thoroughly before and during use. If you have multiple batch numbers, mix them together before applying. Note! Do a test: Try a brushout on your project to ensure the color and product is what you want before doing your entire project. XTREME WARRANTY Rymar warrants that the contents of this can are not defective. In the event this product fails to comply with the warranty it is Rymar LLC’s option to furnish replacement of product or a refund of the purchase price with proof of purchase. In the event of product failure and or misuse of this product, Rymar and its affiliates assume no responsibility (implied or otherwise), for labor, substrate, other items or materials used in either the application of this product or otherwise.
Rymar Xtreme Weather wood sealer and deck stain is a low VOC compliant stain that can be ground shipped to all 48 states.
**Rymar Premium (oil base) will still be available in 85085 Cedartone. Please call for pricing.
**Rymar Premium is not available in: California, Connecticut, Rhode Island, Maine, Massachusetts, New Hampshire, Vermont, Delaware, District of Columbia, Maryland, New Jersey, New York, Northern VA, Pennsylvania, Arizona, Ohio.